Now showing items 1-20 of 23

    • 4 axis helicopters (con rotor) 

      Udompong, Natthawut; Cheewharungrueamgku, Piyapong; Sirikhemapoorn, Thanawut (2018-07-22)
      Four core helicopter project (Con Rotor) that coordinates with a GPS unit with a survey prepared for aerial photography and GPS positioning system with GPS and the flight logs with GPS. Making helicopter 4 cores with ...
    • Analysis of compound material behavior for brake pad and linings at difference temperatures 

      Pajobsuk, Surasak; Kahan, Aekpot; Koedsong, Aeknat; Khaodang, Prateep (2018-07-21)
      Brake system is used the friction between disk and pads. In the driving conditions, the brake behavior from the driver is difference. Based on this reason, the damage on disk and pads are occurring. Nowadays, the ratio of ...
    • The application of solar energy in rural area 

      Tosuk, Kriangsak; Wisessing, Chayut; Sirisukodom, Worapon (2018-07-21)
      This research is studied the design and contract the electronic generator from Solar cell integrated with electrical at home in the rural area. The design is combined between solar cell and electrical at home. The mutation ...
    • Assigning guidelines to reduce carbon footprint for domestic small and medium-sized hotel based on the assessment of the carbon footprint for organization (CFO) using Thailand greenhouse gas management organization (public organization) standard 

      Pongchavalit, Pongchai; พงษ์ชัย พงษ์ชวลิต (2016-09-04)
      This study is to determine guideline to reduce carbon footprint for organization of medium and small hotels in Thailand using the Carbon Footprint for Organization (CFO), according to Thailand Greenhouse Gas Management ...
    • Controlling work-in process technological improvements for fabric pretreatment, dyeing and finishing industry using barcode system 

      Charoenkid, Noppawan; นพวรรณ เจริญกิจ (2016-09-04)
      The objective of this research is to develop a technology management system for industrial Fabric Pretreatment, Dyeing and Finishing factory, to resolve existing problems caused by manual input. Firstly, this research ...
    • The experiment of power flow analysis in power system 

      Konchit, Chaturon; kongthong, Rachata; Faikrajaisap, Sadayu (2018-07-22)
      This thesis presents the design and construction of an experiments of the power flow in the power systems. For the operating system of the power flow in the power systems. Comprise with the real power, Reactive power, ...
    • Friction coefficient of brake testing 

      Mokthaisong, Prueg; Phokaew, Amornsak; Chuamjai, Kosit; Kunpai, Suchacree (2018-07-21)
      Nowadays, the automotive industry in Thailand has been widely growing. Brake pad is one of the automotive products that play a vital role in automotive industry because it is the most critical seeurity part. Consequently, ...
    • Model controlled of a.c. three phase generator for characterization of a.c. three phase generator 

      Arkardwipard, Nitiwat; Poomsuntrontum, Panuwat; Chaladying, Saran (2018-07-21)
      This thesis is duplicated of the controlled of the AC. Three Phase Generator, with case study and analyze of the characteristic of generator in various operating conditions. By the model works of the actual use in ...
    • Model of command system for automatic power control 

      Kamson, Jirapong; Sirichaiwattana, Panupong; Phuttha, Narawut (2018-07-21)
      This project report proposes a Model of Command System for Automatic d by the device can be controlled automatic transmission. Using the computer Power Control. Generator as a second pass through devices various. And to ...
    • Model of over voltage control in transmission system 

      Rungruauang, Puchong; Mangkang, Rattapon; Mangkang, Athirut (2018-10-08)
      This thesis offers the design of the impulse generator 1.2 / 50 μs, which applies for studying and generating the lightning impulse, to test the endurance of the electricity transmission line. Moreover, this study analyses ...
    • Model of protection equipment for three-phase transmission line 

      Sooksuda, Krisana; Pipatphong, Kaittiphong; lanapun, Tanate (2018-07-21)
      This project report proposes a design and construction of model of protection equipment for three-phase transmission line by voltage relay for protect. By protection equipment can protect the transmission line from over ...
    • Model of three-phase generator for voltage and power control 

      Promsila, Comgrich; Chotimit, Chatchai; Whannoo, Metee (2018-10-08)
      This project presents the simulation of a three-phase generator. The aim is to study and analyze the condition of the generator functions. By simulating the operation of the generator used in factory, which use this ...
    • Reducing waste in the manufacturing of bicycle tyres by using Six Sigma 

      Phoompong, Paisal; ไพศาล พุ่มพงษ์ (2016-09-04)
      This research aims to reduce waste in the production process to meet the target to find ways to prevent defects occurring in the curing process and to improve preventative measures available today. The waste found in the ...
    • A study of brake proportional effected to vehicle control 

      Pakadach, Patawee; Wongsatit, Choosak; Boodkrong, Ittikorn (2018-07-22)
      Braking system is the main of safety for motor vehicle. It uses to slow down or stop of vehicle movement. Normally, braking system can not to adjustable in the recently. The brake efficiency depends up on to 3 factors by ...
    • A study of crash boxes referred to energy absorption 

      Amonsak, Pat; Rujakom, Apichart; Kamaysom, Itti (2018-07-21)
      Nowadays, an automotive industry steadily has been growing and playing a major role on economy development for many years. The crash box is one of the most important parts for safety but it was found that the crash boxes ...
    • A study of crash boxes with alternative materials referred to energy absorption 

      Sayyood , Virapat; Korut, Watana; Chunderasen, Tanapat (2018-07-22)
      Nowadays, an automotive industry steadily has been growing and playing a major role on economy development for many years. The crash box is one of the most important parts for safety but it was found that the crash boxes ...
    • A study of disc wear effected to brake distance 

      Duangpan, Kittisak; Janpa, Wongsatorn
      A disc brake is one of important auto parts for automotive industry which effected directly to life safety. The wear of brake rotor war affected to the brake efficiency. Lf the wear of rotor was discovered while operating, ...
    • A study of front and back-vented brake disc effecting on braking distance 

      Engineering, Mechanical; Suwantaroj, Kullayot (2018-07-21)
      Nowadays, the automotive parts industry greatly grows up in Thailand. Brake disc is one of products that play a role in safety area. As a result, the various designs such as front and back-vented brake discs are occurred ...
    • A study of heat conductivity behavior of automobile brake pads 

      Nakkong, Pariban; Surapin, Wutthichai (2018-07-22)
      Nowadays, one of the automotive engineering is conductivity of brake pads playing a role in friction coefficient which means safety of customer. Thus thermal properties have been improved using composited materials. This ...
    • A study of heat transfer on disc brake using finite element method 

      Wiwatwittaya, Rawin; Jinna, Wasan; Tilao, Eakachai (2018-07-21)
      Admittedly, a disc brake plays an important role in the auto part industry since it concerns directly with safety. Therefore, the wide range of disc brake has been designed in order to develop its heat ventilation. There ...