| dc.description.abstract | This research deals with paper production from lemongrass and producing a
model product. The lemongrass was boiled in sodium hydroxide solution 400 grams
per litre of water at 80 – 100 degrees Celsius for 3 hours. The separated fibre was
then bleached with chlorine solution 20% per lemongrass fibre 1 kilogram per water
1 litre. Finally, paper pulp was scooped for paper formation and lemongrass fibre
paper was soaked with flame retardant 10% for 10 minutes at room temperatures.
The physical properties of the paper were tested – mass per unit length, longitudinal
and cross section, burn, tearing strength, absorption, and heat resistance.
This research was conducted by cutting lemongrass leaves to a uniform
length, boiling them to separate the fibres for toughness with high strength: the
longer the lemongrass leaves, the greater the strength. The dirt mixed was removed
by boiling the separated fibre. To achieve quality standards the products should be
designed, analyzed, evaluated, and modeling. Sampling group evaluation were used
to help develop lemongrass fibre products for commercial production using natural
resource with maximum cost benefit and technology transfer to the target group.
The result of this research was to develop and process home furnishing
accessories and souvenirs such as lamps, photo frames, paper boxes, tissue box, and
souvenirs.
The procedure for this research was to analyze the satisfaction level of
trainees from Sridonpai, Dumnoen Saduak District, Ratchaburi community and
interested groups amd found that the service provided by officer, trainer, service
processing, and accommodation were on average of high level (X = 4.45, 4.35, 4.22,
and 4.42 ordering) | en_US |
