Show simple item record

dc.contributor.authorSemsri, Aphichiten_US
dc.contributor.authorอภิชิต เสมศรีen_US
dc.contributor.authorSuksukont, Aekkaraten_US
dc.contributor.authorเอกรัตน์ สุขสุคนธ์en_US
dc.contributor.authorSisamut, Samruaien_US
dc.contributor.authorสำรวย สีสมุทรen_US
dc.contributor.authorPudtipatkosit, Thanitsaken_US
dc.contributor.authorธนิตศักดิ์ พุฒิพัฒน์โฆษิตen_US
dc.date.accessioned2022-04-23T11:29:41Z
dc.date.available2022-04-23T11:29:41Z
dc.date.issued2022-04-23
dc.identifier.issn2651-1096
dc.identifier.urihttp://repository.rmutp.ac.th/handle/123456789/3805
dc.descriptionวารสารวิชาการและวิจัย มทร.พระนคร, ปีที่ 15, ฉบับที่ 2 (ก.ค.-ธ.ค. 2564), หน้า 103-118en_US
dc.description.abstractThis study aimed to use Poka-Yoke techniques to help prevent errors and reduce loss in Front Side Fender Model assembly process. The researchers used four tools in the 7QC tools which were Check Sheet, Cause-and-Effect Diagram and Graphs to search for causes and ways to solve problems and Cause and Effect Matrix and ECRS Techniques. The study revealed that the main cause of the problems was that the incorrect assembled side fenders were submitted to another department. This mistake had bad effects on time and workforce spent for correcting work including more expenses. The mistakes occurred because there was no tool for detecting errors in the work piece. Therefore, the researchers use Poka-Yoke techniques in order to decrease errors by designing a control system for target detection while it was moving through the process. After collecting data, the study showed that before the improvement during January to August 2019, the number of problems caused by the process were 0.093. However, the number of problems after the improvement during September to December 2019 reduced to 0. It was obvious that this improvement reduced the loss from the front side fender assembly process up to 100.en_US
dc.description.sponsorshipRajamangala University of Technology Phra Nakhonen_US
dc.language.isothen_US
dc.subjectQuality controlen_US
dc.subjectการควบคุมคุณภาพen_US
dc.subjectAutomobiles -- Partsen_US
dc.subjectรถยนต์ -- ชิ้นส่วน,en_US
dc.subjectAutomobilesen_US
dc.subjectรถยนต์en_US
dc.titleQuality control and loss reduction in the front side fender model assembly process using Poka-Yoke techniquesen_US
dc.title.alternativeการควบคุมคุณภาพและลดการสูญเสียในกระบวนการประกอบชิ้นส่วนบังโคลนหน้าแก้มข้างรถยนต์ด้วยวิธีโพคา-โยเกะen_US
dc.typeJournal Articlesen_US
dc.contributor.emailauthoraphichit@southeast.ac.then_US
dc.contributor.emailauthorarit@rmutp.ac.then_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record